learning material for the blind

Depends on the quantity you are looking for. For 1 to 10 or 30 or so trace the scans in a vector drawing package and cut in laser. How thick are the PVC sheets? For up to 700 microns (0.70 mm) and if doing bulk hand over the vector drawing to a steel rule die maker and then get the sheets punched using the die.
 
^ Thank You. sheet thickness is aprox 3mm
 
You seem to be making a mistake. 50 mm thick is as thick as 3 fingers almost!
Is this as thick as a cadboard?
 
Does not look like 3 mm. Looks more like 0.5 mm die punched. Cannot punch 3mm pvc. Also for Braille like functionality 0.5 mm will suffice. My opinion.
 
^ my sister measured a few sheets. their thickness is aprox 3mm or 4mm

she said embossed dots , curves ... etc could be of 1mm high above surface of the sheet
teacher has to guide blind students by moving their fingers above the figure & they feel shape

Thank You
 
Sorry, I could not make out. Those did not look like raised to me. Now that you mentioned it, I get it. In that case these have to be 3D printed and you have to see after testing one out whether a 3D printed one will work. Send me better photos taken at a slight angle not head on so i can better interpret the relief. How many do you need?
 
Have you found a solution?