LaatSahab
Skilled
You can go up to 32GB (2x16GB) on this laptop.Is 16GB the maximum that this laptop can support?
Any standard DDR4 2400MHz CL17 SODIMM module should be good.As for running Dual Channel config, can you please tell me the exact specs like frequency and latency that I should use?
Not worth it I'm afraid. 2400MHz is the most this processor can support and tighter timings will make little to no difference on these laptops.I'm open to swapping the current module too if it means better performance.
You can use a 4.0 drive if you have one already. It will just be limited to 3.0 speeds for sequential read/write but other performance parameters should not be affected.Another question that I have is as the Mainboard screenshot says Bus Speed is PCIe 3.0, should I use a solid-state drive that's PCIe 3.0 or can I use PCIe 4.0 drive also?
Depends on your use case. If it's regular office work, browsing etc then adding one more 8GB stick and an SSD is enough.So what would be better, adding in another 8GB stick or putting in a new set of 2x16GB sticks?
Another 8 GB, unless you use this laptop for video editing. You don't need 32 GB RAM for day to day use.So what would be better, adding in another 8GB stick or putting in a new set of 2x16GB sticks? As for the NVMe drive, I'll be opting for the pre-owned route and thus will keep my eyes peeled for listings here.
That takes care of the hardware side, still need to know how to config the BIOS and the system for SSD and port the OS on it and boot from it, leaving current platter drive for data storage purposes.DIY guide for how to install
- Align contacts
- push forward
- push downward
- for SSD, additionally, screw
Done.
Ah, yes. My own experience with this was an absolute nightmare.That takes care of the hardware side, still need to know how to config the BIOS and the system for SSD and port the OS on it and boot from it, leaving current platter drive for data storage purposes.