I have latest bios.Check for any BIOS updates/clear CMOS.
It's on old system.Sounds like a PSU issue to me. Could you list your pc specs and age of the PSU?
Don't have 24 pin cable which goes in mobo.I kinda had the same issue this week too. Do you have any sleeved/LED 24 pin extension cables?
Since you bought it from me, buddy, were you able to get it back to life?I have a simiilar issue with a GA-Z97-UD7 TH. I consider it to be a senile system even though I have older stuff that's working like new, since it's so finicky about starting up. I have to clear CMOS each and every time. My current solution is to never turn it off. But I suspect the BIOS chip needs to be reflashed or replaced since flashing through the existing BIOS doesn't fix the problem. The most striking symptom I have is that the post code display won't show anything on power up, so I clear CMOS and then it works on the next boot.
You could try something as simple changing the CMOS battery and then reflashing the current BIOS in a DOS environment. I'm half way stuck wondering if it's time to let go of such old hardware or to pursue a fix.
You turn off the power supply > Motherboard forgets settings if the CMOS battery is dead. One reboot later, the bios settings are restored since first reboot had power and second reboot happened without power loss. I think your problem should be solved once you replace the CMOS battery, power on, configure the bios (time, AHCI, boot order etc) and you should be good.I have to unplug the main motherboard power cord and plug the same again.
System runs fine for hours to days, until i manually shut down and turn off power switch *electric supply*.
Not sure how to debug this.
Replaced CMOS battery 2 days ago but same issue. PC is on since yesterday (more then 24 hours) without any issues.You turn off the power supply > Motherboard forgets settings if the CMOS battery is dead. One reboot later, the bios settings are restored since first reboot had power and second reboot happened without power loss. I think your problem should be solved once you replace the CMOS battery, power on, configure the bios (time, AHCI, boot order etc) and you should be good.
what exactly is the issue you're facing ? Can you please explain a bit more.I have to unplug the main motherboard power cord and plug the same again.
System runs fine for hours to days, until i manually shut down and turn off power switch *electric supply*.
Not sure how to debug this.