Offering a one-stop solution to sheet piling and specialized foundations, ASAP Group is at work at the FDOT/FTE widening of the Florida's Turnpike (HEFT)
Oct 29, 2020, 08:16 ET
MIAMI, Oct. 29, 2020 /PRNewswire/ -- The ongoing E8R80 project lead by Halley Engineering intends to widen several sections of Florida's Turnpike in the Miami Dade County from 8 lanes to 10 with express lanes, requiring temporary critical walls and micropiles.
The project consists of six temporary critical walls necessary for the installation of MSE walls, temporary shoring entailing steel sheetpiles and 430 temporary post tensioned tiebacks with wale as well as 14 phase-one micropiles with maximum lengths of 66ft with a maximum load of 239 tons. ASAP performed successful verification tests to a load of 478 tons and four successful proof tests to 130 tons.
"As with any project, we did face some challenges related to hard driving conditions and tight a schedule," comments chief engineering of ASAP Installations Rafael Garcia. "Sheet piles needed to be driven through hard limestone. ASAP first drove the piles as deep as possible using a vibratory hammer followed by its hydraulic impact hammer to drive the remaining pile length to minimum tip elevation. Thanks to ASAP's specialized equipment, predrilling was not required to drive the sheet piles, which would have been required with any regular industry pile driving setup. ASAP's performance is saving significant time in the installation process," Garcia explained.
Additional challenges encountered included limited work area and access for the micropiles and tiebacks installation around existing structures and utilities while supporting an active highway. "ASAP coordinated with the contractor to make the piles at pier 2 and pier 3 available at once and worked an extended night shift to install two piles per shift by moving between piers during the lane shutdowns. We also were able to work within the median between the northbound and southbound turnpike to install the micropiles through the MSE wall overburden and into the subgrade soils. Utilizing our MC8D capability and size, we were able to install the micropiles at the designated locations with the limited access constraints," added vice president of specialty foundations Stephen Dimino.
"Both entities working together enabled us to promptly address issues in the field, increase the productivity of the tieback installation using our hollow bar system in lieu of the DOT designed helical system, and beat the Client's installation schedule," says chief executive officer of ASAP-Group LLC, Simon Den Tuinder.
About ASAP-Group LLC
ASAP Group is an all-round partnership of foundation companies with ASAP Installations LLC specializing in sheet pile installation based on patented technology and equipment developed in Europe; and ASAP Specialty Foundations LLC and ASAP Engineering LLC specializing in a broad variety of shoring and foundation support and value-engineering solutions. Servicing the Southeast and Mid-Atlantic areas, ASAP Group is a family-owned business based on relationships, trust, competence, technology, and sustainability. Visit www.asapgroup.com.
To learn more about the company, its services, or for more information, contact Ed Bisono at [email protected].
SOURCE ASAP Group LLC
