Chevy Camaro eCOPO Blows Away Tesla Model S P100D

8 H BY WADE MALONE 36

The eCOPO Chevy Camaro concept will be on view at the SEMA Show in Las Vegas

In celebration of 50 years of the original COPO Chevrolet Camaro production race car, the carmaker has announced an electric concept version of the car with over 700 horsepower and 600 lb-ft of torque.

The Detroit automaker, best known around the EV community for the Chevy Volt and Bolt EV, is dipping their toes (at least as a concept) into the electric sports car with the eCOPO announcement. The car is expected to have a 9 second quarter-mile time although testing is still in process.

If this is achieved it would blow away the quarter mile time of the Tesla P100D and perform nearly as well as the upcoming Tesla Roadster. But not quite.

We have seen plenty of conversions of Chevrolet Camaros and even more powerful Chevy’s such as the pricey Corvette Genovation GXE. Now that we have an electric Camaro concept from Chevy itself, we hope this is a peek at the automaker’s future product portfolio.

We have been teased over the years by electric concepts that never made it to market. However we did spot a decidedly Camaro shaped vehicle when GM announced 20 production EVs around this time last year. Perhaps there is hope that this one enters production.

Chevy Bolt 20 EVs

The full press release is below:

eCOPO Camaro Race Car Concept Electrifies Drag Racing

LAS VEGAS — Fifty years after the original COPO Camaro special-order performance models were introduced, Chevrolet’s eCOPO Camaro Concept demonstrates an electrified vision for drag racing.

Developed by General Motors and built in partnership with the pioneering electric drag racing team Hancock and Lane Racing, the concept race car — based on the 2019 COPO Camaro — is entirely electric-powered, driven by an electric motor providing the equivalent of more than 700 horsepower and 600 lb.-ft. of torque.

Chevrolet estimates quarter-mile times in the 9-second range. Testing is ongoing.

“The eCOPO Concept is all about where we go in the future with electrification in the high-performance space,” said Russ O’Blenes, director, performance variants, parts and motorsports at General Motors. “The original COPO Camaro program was all about pushing the envelope and this concept is an exploration with the very same spirit.”

Chevrolet partnered with Hancock and Lane Racing not only for the team’s success in NHRA drag racing, but its involvement with Patrick McCue, the driving force behind the record-holding “Shock and Awe” electric drag racing car, and his Seattle-area Bothell High School automotive technology program. More than a dozen students participated in the development and assembly of the electrified drag car, with the racing team’s assistance.

“This project exemplifies Chevrolet and General Motors’ commitment to engaging young minds in STEM (science, technology, engineering and math) education,” said O’Blenes. “It also represents our goal of a world with zero emissions, with the next-generation of engineers and scientists who will help us get there.”

800 volts

Just as the original 1969 COPO Camaro models relied on creative engineering to make them successful in Stock Eliminator drag racing, the eCOPO breaks new ground with its unique motor and GM’s first 800-volt battery back.

The electric motor is based on a pair of BorgWarner HVH 250-150 motor assemblies, each generating 300 lb.-ft. of torque, and replaces the gas engine. It is connected to a conventional, racing-prepared “Turbo 400” automatic transmission, which channels the motor’s torque to the same solid rear axle used in the production COPO Camaro race cars.

The all-new 800-volt battery pack enables a more efficient power transfer to the electric motor, while also supporting faster recharging, which is important for the limited time between elimination rounds in drag racing.

“Eight-hundred volts is more than twice the voltage of the battery packs in the production Chevrolet Volt and Bolt EV, so the eCOPO pushes into new technological territory,” says O’Blenes. “As GM advances its electrification leadership, a big step might just come from the drag strip.”

The battery pack is composed of four 200-volt modules, each weighing approximately 175 pounds, mounted strategically in the car for optimal weight distribution. Two are located in the rear seat area and the other two are in the trunk: one in the spare tire well and the other in the area over the rear axle.

A full Battery Management System monitors all critical voltages and temperatures within the pack. It ties into a comprehensive safety system that continuously evaluates all vehicle electrical components for proper function and safe operation. The batteries in the rear compartment are sealed off from the interior and an integrated driveshaft tunnel has been added between the modules for increased protection. Additionally, the roll cage in the trunk area has been expanded to provide additional protection for the rear-mounted modules.

With the modules’ strategic positions, the eCOPO Camaro has greater than a 56-percent rear-weight bias, which helps launch the car more efficiently.

Electric crate motors

The eCOPO Camaro Concept expands Chevrolet and General Motors’ electrification development and supports future product development. It also suggests a potential new avenue for Chevrolet’s crate engine and performance parts portfolio.

The eCOPO Camaro’s electric motor has the same bell house mounting pattern and crankshaft flange as the popular LS-family engines in Chevrolet’s crate engine portfolio. That allows it to bolt up to just about any General Motors transmission. In fact, the transmission, driveshaft and other drivetrain components remain in the same locations as in a gasoline-powered COPO Camaro race car, meaning the electric motor simply bolts into the engine compartment, in place of the gas engine.

“The possibilities are intriguing and suggest a whole new world for racers,” said O’Blenes. “Chevrolet pioneered the concept of the high-performance crate engine right around the time the original COPO Camaro models were created, and the eCOPO project points to a future that could include electric crate motors for racing, or even your street rod. We’re not there yet, but it’s something we’re exploring.”

In the meantime, Chevrolet and Hancock and Lane Racing will continue to develop the eCOPO Camaro and test it on the drag strip, seeking quicker elapsed times with all-new technology.

The eCOPO Concept, shown in Electric Blue, joins the 50th anniversary 2019 COPO Camaro production race car and approximately two dozen additional Chevrolet concepts and show vehicles at the SEMA Show, in Las Vegas, through Nov. 2.

eCOPO Camaro

eCOPO Chevy Camaro smokin

eCOPO Chevy Camaro

Categories: Chevrolet

Tags: , , , ,

Leave a Reply

36 Comments on "Chevy Camaro eCOPO Blows Away Tesla Model S P100D"

newest oldest most voted
Steve

The Tesla Roadster (which I guess is also a concept) has a quarter mile time of 8.8 seconds… and it’s a four-seater.

mzs112000

The Roadster is not a concept, Tesla is already bulding the tooling and intends to take it to mass production soon.

Sammy

Mass Production? Hardly. Volume production more likely. Tesla need to keep the numbers limited in order to justify the high price. Besides how many hundred thousand people can afford $200K for a car?

Kdawg

The Gen2 Roadster is a 4-seater? Not from the pics I see.

Daniel

It’s a 2+2

Ken

What a shock! A purpose built drag racer theoretically can beat a large family sedan in a drag race. Imagine if it was built to actually take full advantage of electric motors.

Brian

I would be ok with one of these in my driveway. It would absolutely destroy my neighbor’s Challenger. The electric sports car needs to arrive already!

Mark.ca

“The electric sports car needs to arrive already!”
I don’t know about that. If the S can do low 2s what the hell should we expect from the ev sports? I’m too scared to think about it.

wavelet

It already has… Just look at Rimac.

mzs112000

I just wonder when/if the electric crate motors will go on sale…. If they come with batteries(or Chevy sells batteries as well), it could be a boon for conversions, since the motors will bolt up(no pun intended) to almost any Chevy transmission. I would like to see a 1964 Impala converted, and also lets convert some Tahoe’s and Suburban’s as well(that would help remove the biggest polluters)

liuping

Would the normal Chevy transmission be able to handle the instant torque of an electric motor?

yo

Not from a prrformance electric motor but should fo fine with a Leaf type motor…
But you also don’t want a transmission with a electric motor just a differncial…

Neromanceres

The hookup for this is for GM LS motors which is their small block V8 engines. A number of those transmissions should be able to handle the high torque. GM also sells crate high torque transmissions. I would love to build an electric Tahoe. This could also be used to make an electric pickup truck.

yo

The crate motors should come with a battery and the whole charging and inverter systems…
I think their would be a market for it even at the Bolt performance level…
One day…
Probably far away 🙁

Joel B

I find it interesting they went with a standard transmission. The idea of a motor assembly that has the same bell housing bolt pattern is interesting, but I question how often using an actual transmission would be required.

Roy_H

This is a disappointing low tech conversion. I am amazed it works as well as it does. Utilizing the same automatic transmission drivetrain is just dead weight. Should be 4 wheel drive with motors close to wheels. Sounds like it has to be recharged for each race.

amt

It’s All Low Tech Smoke & Mirrors . 🙁

Tom Harrison

The second image seems to be showing a tire burnout at a drag race. In the Tesla Racing Channel on YouTube the driver of a P100D carefully avoids water pit and relies on brilliant traction control.

Willie

This is a parody?

David Murray

800 volts huh? I’ve often wondered why manufacturers are sticking with battery packs in the 300-400 volt range. I mean, theoretically higher voltage is more efficient and allows for smaller wires and less heat generation. But I’m sure there’s some physics reasons why they have stuck with the voltages they’re using now. So can anyone enlighten me as to how that works?

Neromanceres

It has to do with vehicle charging. CCS1 was limited to 500VDC max. CCS2 can do up to 1000VDC max. Note the 800VDC is likely a nominal pack voltage so a battery like this would likely see charge voltages as high as 900VDC.

Timothy Hughbanks

Pedant alert:

“…we hope this is a future peak at the automakers future product portfolio.”

You meant “…a peek at the automaker’s future product portfolio.”

James Jordan

It’ll be a disaster and go up in evapor

Jimi seko

Bitchin’ Camaro! I believe the legacy auto companies who will be most effective at competing with Tesla are companies who have CEOs with an engineering background. Mary Barra is an electrical engineer.

Neromanceres

Yup the engineers are now in charge at GM. GM used to be run by finance and accounting types. It nice to see the engineers back in charge.

robus

Who gives a s&%*? Make a real car that people can buy!

yo

You people kill me…
No concept BEVs equals no production BEVs…
Concept BEVs mean they are slowly turning in the right direction…
And huge companies turn slowly…

Casualsurfer

And it’ll have a range of…80 miles?

David murray

I doubt it. In order to have enough amps for that sort of horsepower, it would need to be a big battery.

westcoaster

that’s like a couple hundred 1000′ runs (and back)!!

Noah P Godwin

Well of course your imaginary car beats the Tesla.

Neromanceres

This car actually does exist.

westcoaster

YES, yes, yes!! Bring it on Chevy!! Awesome that they’re even talking about this… future looks electrifying!!!

BEVfan

GM should better focus on bringing the next Bolt to market.

andi_nan

I absolutely like that! Even the crazy cars built by crazy petrolheads are EVs.