Chat Forum

Home Cinema: Quiet dialog in multi-channel DTS.

14 posts & 8 voices | Started 1 hour ago by medlow | Latest reply from medlow

Tags:

No tags yet.

medlow - Member

I have just been drooling over the speakers in the other thread, and it reminded me of a long standing issue I have with my setup.

Speakers: Kef 1005.1 5.1.
Receiver: Yamaha RX-S600.
Source: WD-TV network streamer, varying file formats from x264, MP4 etc. Via HDMI.

I have never been able to listen to a movie without having to alter the volume to increase the dialog then turn it down when the action stars.
Its a pain in the 4ss! The explosions are too loud and the talking is too quiet.

I have done the usuals like increase the centre channel level higher than all the others. This made a difference but still not acceptable.
Playing with the dynamic range (either on or off) seems to help too but still not enough..

The audio geeks have probably noticed that I am limited for space by looking at my components; small speakers and slimline rcvr.

Am I missing something here?

Posted 1 hour ago #
cloudnine - Member

Buy a bigger centre speaker?

Or just buy some proper speakers..

Posted 1 hour ago #
Cougar - Moderator

I'd be checking that the source isn't transcoding the audio into something stupid first off.

Posted 1 hour ago #
medlow - Member

@Couldnine, I thought the Kef's would be well up to the job of playing relatively quiet volumes to my less than trained ears. Are they really that bad? I've had them years.

@Cougar, how can I check that?.
But to be honest, this happened with hardcopies too, so this eliminates any transcoding shenanigans I assume.

It is not 'wrong' sounding, the centre channel is present and correct, just not obvious like it needs to be when playing at sensible volumes as the kids are in bed.

Posted 1 hour ago #
rossburton - Member

You've definitely verified this happens with a proper surround source (like a bluray plugged directly into the receiver)?

Posted 1 hour ago #
retro83 - Member

Glad somebody else has the same problem, this drives me nuts.

No combination of nightmode, DRC, etc solves it.

In my googling, i found something called "dolby volume" (link) which appears to do what we want. Next to find a receiver which implements it.

There is another one called Odyssey somethingorother and Yamaha have something called "Adaptive DRC" (link) which seems to do it

Posted 1 hour ago #
Kamakazie - Member

Your speakers are just fine. Getting 'bigger' ones won't solve an issue with a quiet centre channel.

Posted 1 hour ago #

medlow - Member

You've definitely verified this happens with a proper surround source (like a bluray plugged directly into the receiver)?
Yep, pretty certain this happened before I jumped into the world of streaming file formats.

Glad somebody else has the same problem, this drives me nuts.
Yep, a few of my mates also have mentioned this too.

Your speakers are just fine. Getting 'bigger' ones won't solve an issue with a quiet centre channel.
I thought this too.

Posted 1 hour ago #
cloudnine - Member

I was just going with the usual stw unhelpful reply by someone..

Have you thought about a sub woofer.. these are good.. you'll be able to feel the explosions!

http://www.bkelec.com/hifi/sub_woofers/xxls400df.htm

Posted 1 hour ago #
The Flying Ox - Member

Mine does this depending on what Surround decoding setting I have it on. The are about 20 different settings so it took a bit of playing to sort out, but if it's on Neural-X or DTS:Cinema then the centre channel is crystal clear regardless of what's happening elsewhere.

Posted 51 minutes ago #
medlow - Member

Have you thought about a sub woofer.. these are good.. you'll be able to feel the explosions!
I the matching Kef sub to make it a 5.1 system.
And yes the explosions are excellent. But that's not what I'm wanting when the kids are asleep above the lounge..

Posted 50 minutes ago #
5lab - Member

before you buy anything, try a different source to check it's not (somehow) your source (rather than the amp). put kodi on a laptop and play the file from there (over hdmi, with passthru) and see if it still happens.

is the amp displaying DTS on it's screen? If not, the box is doing some interpretation of the signal and maybe needs to be configured to understand that passthrough is on

Posted 46 minutes ago #
medlow - Member

Mine does this depending on what Surround decoding setting I have it on. The are about 20 different settings so it took a bit of playing to sort out, but if it's on Neural-X or DTS:Cinema then the centre channel is crystal clear regardless of what's happening elsewhere.

I leave the DSP effects well alone, I do not like the artificial effects they give. Like 'cathedral' or 'shower'. I just dont get the idea behind them.

I leave it on 'straight DTS', no echo or artificial sound is added.
I dont mean 'pure direct' though, that removes all processing and sounds naff.

But as you mention it, I might try some of them again. I immediately discounted them years ago as I thought they were a real gimmick for the 'it plays really loud so must be good' folk. ?

Let me try to find the Yamaha equivalent for DTS:Cinema (I think all AV makers call them different names)

Posted 39 minutes ago #
medlow - Member

is the amp displaying DTS on it's screen? If not, the box is doing some interpretation of the signal and maybe needs to be configured to understand that passthrough is on
Yes the amp says DTS. I have the source on HDMI passthrough and I see the little DTS light on and see it as a big name on the front panel.

Posted 37 minutes ago #

Reply

You must log in to post.

Chat Forum

Home Cinema: Quiet dialog in multi-channel DTS.

Reply

Singletrack

Website & Forums

Exits